Attention all skateboarders! Want to give your collection the spotlight it deserves but don’t want to put any holes in your walls? Fear not! There are many creative ways to hang a skateboard without nails for avoiding any damage to the wall.
From using adhesive strips to installing floating strings, you’ll find the perfect solution for your space and style.
Ready to turn your walls into a stunning skateboard gallery? Keep reading to discover the 7 best no-nail hanging methods that will make your boards the envy of all your friends.
How To Hang a Skateboard Without Nails?
1. Hang String from Molding
Hanging your skateboard using a Hang String from molding is a simple and effective method that requires only a few materials. Here’s what you’ll need:
- Hang String
- Scissors
- Ruler or measuring tape
Steps to Follow
| Step | Instructions |
|---|---|
| 01 | Measure the length of the Hang String needed to hang your skateboard by holding the end of the string against the top of the skateboard and marking the spot where it reaches the molding. |
| 02 | Cut the Hang String to the desired length, allowing for some extra string on both ends for tying knots. |
| 03 | Tie a knot on one end of the string and secure it to the screw on the molding. |
| 04 | Hold the skateboard against the wall and tie the other end of the string to the bottom of the board. |
| 05 | Adjust the string so that the board is level and tighten the knots. |
And that’s it! Your skateboard is now securely hung on the wall, adding a unique touch to your room and keeping it safe from damage.
2. Take Advantage of Command Strips
Command Strips are great for hanging your skateboard on the wall without damaging the surface. Here’s what you’ll need:
- Skateboard
- Command Strips
- Ruler or measuring tape
- Pencil
Steps to Follow
| Step | Instructions |
|---|---|
| 01 | Clean the area on the wall where the Command Strips will be applied. |
| 02 | Peel the backing off the Command Strips and apply them to the back of the skateboard, following the manufacturer’s instructions. |
| 03 | Hold the skateboard against the wall and mark the top and bottom corners of the board with a pencil. |
| 04 | Remove the skateboard from the wall and place the Command Strips on the marked spots, ensuring they are evenly spaced. |
| 05 | Hang the skateboard back on the wall and press firmly on the Command Strips to secure the board in place. Do the same for this. |
That’s it! Your skateboard is now securely hanging on the wall, free from damage, and ready to be admired.
3. Use the Fireplace Topper Deck
A Fireplace Topper Deck is a simple and stylish way to hang your skateboard on the wall. Here’s what you’ll need:
- Skateboard
- Fireplace Topper Deck
- Ruler or measuring tape
Steps to Follow
| Step | Instructions |
|---|---|
| 01 | Place the skateboard on the Fireplace Topper Deck, making sure it is level and centered. |
| 02 | Secure the skateboard to the Topper Deck by screwing it into place, ensuring not to damage the board. |
And that’s it! Your skateboard is now secure on the wall, adding a stylish touch to your room and protecting it from damage.
The Fireplace Topper Deck is a great option for those who want to showcase multiple boards, as it can accommodate multiple boards stacked on top of each other.
4. Put it on a Pegboard
A pegboard is a versatile and practical way to showcase and keep your skateboard within reach. Here’s what you’ll need:
- Skateboard
- Pegboard
- Screws
- Wall anchors (if needed)
- Hooks
Steps to Follow
| Step | Instructions |
|---|---|
| 01 | Install the pegboard on the wall, using screws and wall anchors if needed. |
| 02 | Attach hooks to the pegboard, ensuring they are spaced apart and level. |
| 03 | Place the skateboard on the hooks, ensuring it is secure and won’t fall off. |
A pegboard is also a great option for those who want to showcase multiple boards, as it can accommodate multiple hooks for hanging multiple boards.
5. Do the Wall Lean
The wall lean is a simple and stylish way to hang your skateboard on the wall. Here’s what you’ll need:
- Skateboard
- Ruler or measuring tape
- Pencil
Steps to Follow
| Step | Instructions |
|---|---|
| 01 | Hold the skateboard against the wall at the desired height and angle, ensuring it’s balanced and won’t fall over. |
| 02 | Mark the top and bottom of the board with a pencil. |
| 03 | Place the skateboard against the wall, aligning it with the marked spots. |
The wall lean is a great option for those who want to showcase multiple boards, as you can stack multiple boards on top of each other. It’s also a quick and easy option for those who want to switch up the look of their walls without damaging the surface.
6. Use Your Bookshelf
Using your bookshelf to display your skateboard is a practical and stylish way to keep it within reach and show it off. Here’s what you’ll need:
- Skateboard
- Ruler or measuring tape
- Pencil
Steps to Follow
| Step | Instructions |
|---|---|
| 01 | Measure the width and height of your skateboard. |
| 02 | Place the skateboard on the shelf, ensuring it fits and won’t fall off. |
| 03 | Arrange other items on the shelf around the skateboard to create a balanced and stylish display. |
And that’s it! Your skateboard is now on display, adding a unique touch to your room and protecting it from damage.
Using a bookshelf is a great option for those who want to showcase multiple boards, as you can stack multiple boards on the shelf for a striking display.
7. Start With the Floor
Displaying your skateboards on the floor is a practical and stylish way to show off your collection and keep them within reach. Here’s what you’ll need:
- Skateboards
- Ruler or measuring tape
- Pencil
Steps to Follow
| Step | Instructions |
|---|---|
| 01 | Measure the space where you want to display your skateboards. |
| 02 | Arrange the skateboards on the floor, ensuring they fit and are evenly spaced apart. |
| 03 | Mark the location of each skateboard with a pencil. |
| 04 | Place each skateboard in its marked location, ensuring it’s level and stable. |
Displaying your boards on the floor is a great option for those with limited wall space who want to showcase multiple boards strikingly and practically.
- Is Converse Good for Skateboarding? Expert Analysis Inside
- Why Is My Skateboard So Slow? Discover 10 Solutions!
- Can You Bring a Skateboard on a Plane? All Airlines Policies
Conclusion
Learning how to mount a skateboard to the wall without nails is a great way to keep your board safe and showcase them. Whether you choose to use a pegboard, wall lean, bookshelf, or floor display, you’ll be able to create a display that represents your love for skateboarding.
Each option offers unique benefits and challenges. So it’s important to consider your space, budget, and personal preferences when deciding. With these tips and tricks in hand, you’ll be able to hang a skateboard on the wall without nails and enjoy your collection for years to come.
